Making Day/Night Mode Focus Settings - Canon VB-M700F Operation Manual

Network camera
Hide thumbs Also See for VB-M700F:
Table of Contents

Advertisement

Making Day/Night Mode Focus Settings

You can select the focus control method used when
switching Day/Night Mode to suit the lighting environment
the camera is being used under.
Select [File] > [Day/Night Mode Focus Settings], the
1
[Day/Night Mode Focus Settings] dialog box will open.
Select the focus control method to be used when
2
switching Day/Night Mode.
(1)
(2)
(1) [None]
Select this option when you want to restore the
Day/Night Mode focus settings to the factory
default settings.
(2) [Compensate for light source]
Select this option to adjust the focus position to
suit the lighting being used when switching to
Night Mode.
[Fluorescent]
Select this option to capture video under
fluorescent, LED, sodium or mercury lighting.
[Halogen Lamp]
Select this option to capture video under halogen
or incandescent lighting.
[Infrared (740nm)]
Select this option to capture video under infrared
(740 nm wavelength) lighting.
[Infrared (850nm)]
Select this option to capture video under infrared
(850 nm wavelength) lighting.
[Infrared (940nm)]
Select this option to capture video under infrared
(940 nm wavelength) lighting.
Click [Save settings and restart the camera] to save
3
the settings.
Important
• If you change the zoom position after making Day/Night
Mode focus settings, you will need to make the focus settings
again. Note, if you restore the factory default settings, the
zoom position will be reset to the default position.
• If the [Connection settings] dialog box > [Enable SSL
Communications] checkbox is selected (p. 3-2), [File] >
[Day/Night Mode Focus Settings] is unavailable.
• Even if you use [Day/Night Mode Focus Settings], focus may
not be maintained in Night Mode if the light source changes
(ex. infrared lighting to sunlight).
Note
• The Day/Night Mode focus settings cannot be backed up with
the Backup Tool.
• The Day/Night Mode focus settings are not restored to factory
default settings by pressing the reset switch on the camera.
Setting the Camera Angle
3
-9
3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vb-m600veVb-m40Vb-m600d

Table of Contents