Canon VB-M700F Operation Manual page 143

HTTP Server Messages
H143 User name specification error [notice]
Description (http_auth.c.XXX) get_password failed
(H143)
Meaning An unknown user was specified in user
authentication.
H144 Password specification error [notice]
Description (http_auth.c.XXX) password doesn't match
for %1 %2, IP:%3 (H144)
%1 URL XSS vulnerability countermeasure
implementation (process equivalent to ftpd)
%2 User Name
%3 IP address
Meaning A wrong password was specified in user
authentication.
H145 Connection denied due to host access limitation
[notice]
Description (mod_haccess.c.XXX) host %1 access
denied (H145)
%1 IP address
Meaning Connection was denied due to access
limitation imposed on the host.
H201 Timeout disconnect [warning]
Description a request for %1 timed out after writing %d
seconds (H201)
%1 Request URI
%d 360 (Timeout time)
Meaning Disconnected due to HTTP server timeout
(360 sec.).
System messages
S001 System started [info]
Description starting paramd (S001)
Meaning Parameter management module started.
S002 System settings changed [info]
Description Updated system settings. (S002)
Meaning Settings not requiring rebooting were
changed.
S010 Event service started [info]
Description starting event (S010)
Meaning The event service was started.
S011 Event service shut down [info]
Description shutdown event (S011)
Meaning The event service was shut down.
S012 External device service started [info]
Description starting extio (S012)
Meaning The external device input/output service
was started.
S013 External device service shut down [info]
Description shutdown extio (S013)
Meaning The external device input/output service
was shut down.
S014 Timer service started [info]
Description starting timer (S014)
Meaning The timer service was started.
S015 Timer service shut down [info]
Description shutdown timer (S015)
Meaning The timer service was shut down.
S070 Change to SSL certificate [info]
Description ssl: succeeded to %1 certificate (S070)
%1 generate | load | delete | restore
Meaning A certificate was generated/loaded/deleted/
restored
Countermeasure None
S220 PAN/TILT operation warning [warning] (VB-M40)
Description %1 warning detected. [%2] (S220)
%1 PAN | TILT
%2 Warning details
Meaning An error occurred during operation or
stopping of PAN/TILT.
Countermeasure Check that the camera is not touching the
dome, etc.
List of Log Messages
8
8
-13