ENGINE OIL LEVEL INSPECTION
(!2-11)
ENGINE OIL CHANGE
(!2-11)
ENGINE OIL FILTER CHANGE
(!2-12)
OIL PRESSURE CHECK
(!2-37)
OIL STRAINER REMOVAL
(!2-13)
OIL STRAINER INSPECTION
(!2-13)
OIL STRAINER INSTALLATION
(!2-13)
OIL SEAL REMOVAL
• Remove the snap ring 1.
" 09900-06108: Snap ring pliers
• Remove the oil seal.
OIL SEAL INSPECTION
For oil seal inspection other than the following, refer to page 10-8.
• Inspect the oil seal lip for wear and damage.
• If any defects are found, replace the oil seal with a new one.
LUBRICATION SYSTEM
11-3
Need help?
Do you have a question about the RM-Z450 and is the answer not in the manual?
Questions and answers