Samsung DCS Compact User Manual page 30

OVERFLOW
When calls ringing a station group go unanswered, they can overflow to another des-
tination after a pre-programmed period of time. Each station group has its own timer.
The overflow destination can be a station or station group.
PAGING
System software allows the use of four internal and four external paging zones. Stations
can page any individual zone, all internal zones, all external zones or all zones simulta-
neously. Using system programming, each station may be allowed or denied the ability to
make or receive page announcements to any zone or combination of zones.
POWER FAILURE TRANSFER
Each system is equipped with two power fail relays. If power fails, these relays can be
used to re-route the first two C.O. lines on the card to single line telephones. When
power is restored to the system, the lines and stations return to normal operation and
calls in progress will be disconnected.
PRIMELINE SELECTION
Any station can be programmed to select a specific line, line group, telephone number,
station or station group.
PRIVATE LINES
For private line use, stations can be prevented from dialing and/or answering any line.
PROGRAMMABLE LINE PRIVACY
Each outside line can be programmed to ignore the automatic line privacy. This allows
up to four other parties to join your conversation by simply pressing the line button.
This is similar to 1A2 key telephone operation.
PROGRAMMABLE TIMERS
There are over 35 programmable system timers to allow each installation to be cus-
tomized to best fit the end user's application.
RECALLS
Calls put on hold, transferred or camped-on to any station will recall to the originating
station if not answered within a programmable period of time. A recall that goes unan-
swered for the attendant recall timer will recall to the system operator group. Hold,
transfer, camp-on and attendant recalls have individual programmable timers. Calls
recalling to buttons with tri-colored LEDs will flash amber.
4.1.14
CONTENTS