Other External Components; Using External Audio/Video Players-Av-In - Kenwood DDXBH Instruction Manual

OTHER EXTERNAL COMPONENTS

Using external audio/video
players—AV-IN
When the operation buttons are
not displayed on the screen, touch
the area shown on the illustration.
• To change settings for video
playback, see page 43.
You can connect an external component to the
Audio Video input terminal* and iPod/Audio Video
input terminal. (Page 56 )
* Only for DDX415BT/DDX315 .
❏ Preparation
Select an appropriate input setting for <AV Input>.
• Only for DDX415BT/DDX315 : Perform the
following setting when using "AV-IN2". No
preparation is required for "AV-IN1".
• You can change the setting only when [STANDBY]
is selected on <TOP MENU>. (Page 8)
1
Display the <Input> setting screen.
On the <TOP MENU> screen:
32
2
• For DDX672BH/DDX492/DDX392/DDX372BT/
DDX320BT/DDX272 : Select [AV-IN].
• For DDX415BT/DDX315 : Select [AV-IN2].
❏ Indications and buttons on the source
control screen
1
Playback information
1 AV-IN name
Operation buttons
[MODE] Changes the AV-IN name.
• Press [H] or [I] to select an AV-IN
name.
• This setting does not affect the
source name displayed on <TOP
MENU>.
[MENU] Displays the <TOP MENU> screen.
❏ Starting playback
1
Connect an external component.
(Page 56 )
2
For DDX415BT/DDX315 : Select "AV-IN1"
or "AV-IN2" as the source.
On the <TOP MENU> screen:
For DDX672BH/DDX492/DDX392/
DDX372BT/DDX320BT/DDX272 : Select
"AV-IN" as the source.
On the <TOP MENU> screen:
3
Turn on the connected component and
start playing the source.