Discs; Playing A Disc - Kenwood DDXBH Instruction Manual

DISCS

Playing a disc

• If a disc does not have a disc menu, all tracks on
it will be played repeatedly until you change the
source or eject the disc.
• For playable disc types/file types, see page 59.
❏ Inserting a disc
Insert a disc with the label side facing up.
DDX672BH
DDX492/DDX392/
DDX372BT/
DDX320BT/DDX272
DDX415BT/DDX315
The source changes to "DISC" and playback starts.
• The IN indicator lights up while a disc is inserted.
• If " " appears on the screen, the unit cannot
accept the operation you have tried to do.
– In some cases, without showing "
operations will not be accepted.
• When playing back a multi-channel encoded
disc, the multi-channel signals are downmixed
to stereo.
❏ Ejecting a disc
DDX672BH
DDX492/DDX415BT/DDX392/
DDX372BT/DDX320BT/DDX315/
DDX272
• When removing a disc, pull it horizontally.
• You can eject a disc when playing another AV
source.
• If the ejected disc is not removed within
15 seconds, the disc is automatically inserted
again into the loading slot to protect it from dust.
Closing the monitor panel (only for DDX672BH )
After removing the disc, press M on the monitor
panel. The monitor panel closes.
Playback operations
When the operation buttons are
,"
not displayed on the screen, touch
the area shown on the illustration.
• To change settings for video
playback, see page 43.
❏ Indications and buttons on the source
control screen
For video playback
1
4
Playback information
• The information displayed on the screen differs
depending on the type of disc/file being played
back.
1 Media type
2 Current playback item information (title no./
chapter no./folder no./file no./track no.)
3 Playing time
4 Playback mode (Page 14)
5 File type
6 IN indicator
2 3
5 6
ENGLISH 11