Table of Contents
Advertisement
Before Use
Always take a trial shoot.
Before making important recordings,
always take a trial shoot to confirm
that recording works as expected.
Especially when using "Backlighting
Compensation" or "Night Shooting
with the IR Function", verify that
your settings produce the desired
results.
Use together with the Remote
Control Panel and other
specified, separately sold
accessories.
When using for the first time
or when using in a place with
a different time zone, set the
correct time zone.
The factory default time zone setting
is "Eastern Standard Daylight Saving
Time".
When using in a different time zone,
set the time zone for that region.
In no event will Panasonic be liable for any damages, including any incidental
•
or consequential damages, stemming from a failure to record data or from lost
settings or data.
Any of the following actions can result in problems:
Power supply to the recorder is interrupted or impaired during recording, for
•
example by starting an engine.
If a P2 card is ejected while it is being accessed.
•
8
Usable memory cards
The recorder is designed to use any
P2 card having the "P2" logo.
Do not turn the power off while
recording
Be sure to stop all operations before
turning the power off (page 21).
Turning the power off especially
during access (for example, during
recording) may damage the P2
card or corrupt file management
data, setting information and
other data on the P2 card. If file
data cannot be read correctly due
to corrupted file management
information on the P2 card, the
card should be reformatted. For
details on reformatting, refer either
to the Operating Instructions of the
Remote Control Panel or contact
your supplier.
Advertisement
Table of Contents
