Table of Contents
Advertisement
Setup
(continued)
Setting Item
3 Rec Continue
Time
PreRec Time
(Video)
PreRec Time
(Audio)
PostRec Time
(Video)
PostRec Time
(Audio)
Rule of
Filename
CAM Select in
Trigger
Init Audio2 Rec
Rec Tally Out
Init On Screen
Type
Init Audio Out
(Play)
Skip Target
Trigger/Marker YES
Head of File
4 Programed Rec
Daily
Mon to Sun
∗3 Applies the setting in effect when power was last turned off. Unless power is
turned off properly, the operating state may not be saved correctly.
∗5 When [Daily] is set to "ON", [Mon to Sun] cannot be set.
32
Factory Default Value Description
CONTINUE
Continuous recording time (minutes)
Setting : 1, 2, 5, 10, 15, 20, 30, 60, 90,
90
Video Prerecord time (seconds)
Setting : 0, 10, 20, 30, 60, 90
90
Audio Prerecord time (seconds)
Setting : 0, 3, 10, 20, 30, 60, 90
90
Video Postrecord time (seconds)
Setting : 0, 10, 20, 30, 60, 90
90
Audio Postrecord time (seconds)
Setting : 0, 3, 10, 20, 30, 60, 90
WT
Recording file naming method
Setting : WT(Universal standard time)
1
Camera selection upon trigger input
Setting : 1, 2, NO CHANGE
ON
Initial on/off setting for AUDIO2 input (upon
power on)
Setting : ON, OFF, LAST
ENABLE
Select GPIO Rec Tally output while recording
Setting : ENABLE, DISABLE
OFF
Initial OSD (on-screen display) overlay setting
Setting : SIMPLE, DETAILS, LAST, OFF
BOTH
Initial audio output selection (upon power on)
Setting : OFF, 1, 2, BOTH, LAST
Skip position
Select a trigger or marker location
Setting : YES, NO
YES
Select the starting point of the file
Setting : YES, NO
Programmed recording setting
–
Programmed recording for every day
Setting : –, ON
(Setting "–" will disable start and stop time settings)
–
Programmed recording setting on a specific
day of the week (Monday to Sunday)
Setting : –, ON
(Setting "–" will disable start and stop time settings)
CONTINUE
LT(Local time)
∗
3
∗
3
∗
5
Advertisement
Table of Contents
