Editing The Forwarding Settings - Canon imageRUNNER 1750 Remote Manual

Editing the Forwarding Settings

You can register, edit, or delete the conditions for forwarding received documents.
IMPORTANT
Specifying the Forwarding Settings is available only when the Remote UI is in the
System Manager Mode.
NOTE
For instructions on how to edit the forwarding settings on the machine's control panel,
see Chapter 4, "Setting the Send Function," in the System Settings Guide.
4
1
Click [Add.Func.] ➞ [Forwarding Settings] in the [Add.Func.]
menu.
The Forwarding Settings page is displayed.
2
Edit the forwarding settings.
● To register a new forwarding condition:
❑
❑
4-14

Editing the Forwarding Settings

Click [ ] (Add New Conditions) on the page shown in step 1.
The Add New Conditions page is displayed.
Specify the necessary settings ➞ click [OK].