Canon imageRUNNER 1750 Remote Manual page 102

• [Do not allow]: Disables user from sending documents to a file
File Send:
server.
• [Allow]: Enables user to send documents to a file server.
• [Only allow sending to own address or specified folder]:
Restricts the destination of sending documents to the folder of
a logged on user or to the specified folder. If Active Directory is
used as an authentication server, the home directory (folder) of
a logged on user is used as the destination. If not, or you want
to manually specify the destination folder, select [Specify
destination folder], then enter the name of the file server and
the folder name in [File Server] and [Folder Path]. Selecting
[Add user name] enables you to use the user name of a logged
on user to specify the destination of sending documents under
the specified folder. For example, if <share> is entered in
[Folder Path] and the user name of a logged on user is 'john',
the [john] folder in the [share] folder is specified as the
destination. For instructions on how to send documents to the
folder of a logged on user, see Chapter 2, "Sending
Documents," in the Sending and Facsimile Guide.
<Sender E-mail Address Settings>
Specify LDAP Select this check box to use the e-mail address of a logged on
authentication user user as the sender information when sending e-mails or I-faxes.
address as the The e-mail address is displayed or printed as the sender
sender name: information at the recipient's machine, instead of the unit name.
(See Chapter 1, "Introduction to Send and Fax Functions," in the
Sending and Facsimile Guide.)
Specifying the Authorized Send Settings
4
4-25