Specifying The Snmpv3 Settings - Canon imageRUNNER 1750 Remote Manual

Specifying the SNMPv3 Settings

Specify the settings for SNMPv3 as described below.
IMPORTANT
• Specifying the settings for SNMPv3 is available only when the Remote UI is in the
System Manager Mode.
• Specifying the settings for SNMPv3 is available only when SSL communication is
enabled. See the following information on the settings for SSL communication.
- Chapter 3, "Setting up the Machine for Your Network Environment," in the System
Settings Guide
- "Managing Key Pairs and Digital Certificates from a Web Browser," on p. 2-25
NOTE
The settings for SNMPv3 can be specified only on the Remote UI, while the settings
for SNMPv1 can be specified both on the machine's control panel and the Remote UI.
For more information on the settings for SNMPv1, see Chapter 2, "Connecting the
Machine to a TCP/IP Network," in the System Settings Guide.

Specifying the SNMPv3 Settings

4
4-29