Advertisement
3) Remove one screw, and remove the USB device connector PWB
on the machine side.
(2)
(3)
4) Install the network PWB mounting unit and fix it with 4 screws.
Then connect the connector.
Connect the AC harness mounted to the main unit. Attach the reuse
snap band to the plate.
(1)
(2)
(3)
(3)
(2)
(4)
<Taiwan/Brazil/South Africa only>
(1)
(2)
(3)
(3)
(2)
(4)
(1)
(2)
(2)
(3)
(2)
(2)
(3)
MX-M232D (MX-NB12) 7 - 2
5) Attach the rear cabinet and the rear cabinet cover. Fix it with
screws.
(4)
(4)
(2)
(4)
Note: Since the power PWB is at the vicinity of the MX-NB12, use
enough care when repairing it.
(4)
(4)
(4)
(4)
(4)
(3)
(1)
Advertisement
