Advertisement
[6] MX-FX13/MX-XB17
1. Unpacking
<Before installation>
• For improvement of workability, some description in this manual as
well as components and accessories may change without prior notice.
In this case, refer to the service manual.
A. MX-FX13
Parts included
FAX Expansion Unit: 1
Screws (S tight): 4
Screws (S tight): 6
(Taiwan/Brazil/
South Africa only)
FCC label: 1
(USA/Canada only)
A-TICK label: 1
(Australia/
New Zealand only)
B. MX-XB17
Parts included
FAX Mounting Unit: 1
USB holder: 1
AC harness: 1
USB Expansion harness: 1
line cable: 1
FAX keyboard: 1
FAX power harness: 1
Writing label:4
Line Adapter: 1
(Australia/
New Zealand only)
Ferrite Core: 2
(Taiwan/Brazil/
South Africa only)
Rear cabinet cover: 1
Screws (S tight): 4
AC harness: 1
(Taiwan/Brazil/
South Africa only)
MX-M232D (MX-FX13/XB17) 6 - 1
2. Installation (MX-FX13 and MX-XB17)
Turn off the main switch of the machine and then remove the power
plug of the machine from the outlet.
1) Remove the rear cabinet.
Remove screws. Remove the rear cabinet and the rear cabinet cover.
(1)
(1)
(3)
(1)
2) Connect the bundled AC harness to the power PWB of the
machine.
Note: Connect the connector with the insulation tube of the AC harness
to the power PWB of the machine.
(1)
(1)
(1)
(1)
(1)
(4)
(2)
Advertisement
