RECARO Monza Nova 2 Reha Instructions For Assembly page 9

RECARO Monza Nova 2 Reha – Instructions for assembly and use (supplement)
Abduction block (accessory)
Assembly:
Before assembling the abduction block, the crotch pad needs to be removed. Open the 5-point-positioning belt and
remove the crotch pad by pulling it off the belt buckle.
Remove the plastic cap from the end of the groin strap. Unthread the harness buckle and retainer from the groin strap.
Guide the belt strap through the slit of the abduction block and velcro-fasten it on the seating surface in the desired
position. Mount the belt buckle, sliding buckle and plastic cap to the belt strap again. Please also remember to
re-attach the crotch pad.
Adjustment:
The abduction block can be adjusted in depth. In order to do so, it first has to be released from the groin belt. Remove
the plastic cap from the end of the groin strap. Unthread the harness buckle and retainer from the groin strap. Pull the
abduction block up and off the groin belt.
Thread the groin belt back through the sliding buckle and belt buckle, and secure the loose end of the belt with the
plastic cap. Position the abduction block as needed on the hook-and-loop fastener provided on the seat bottom.
The cover is removable (zipper) and machine washable at up to 30°C. To remove the cover, the abduction block first has
to be released from the groin belt as described above.
Fig. 5a: Removing the crotch pad
Fig. 5c: Unthreading the sliding buckle and belt buckle
Fig. 5e: Assembled abduction block
Swivel base with footrest adapter (accessory)
Please note our separate instructions for mounting! Download: www.thomashilfen.us
Seatfix connection (for swivel base) (accessory)
Please note our separate instructions for mounting! Download: www.thomashilfen.us
Stabilising bow, rear (for swivel base) (accessory)
Please note our separate instructions for mounting! Download: www.thomashilfen.us
Stand, front (for swivel base) (accessory)
Please note our separate instructions for mounting! Download: www.thomashilfen.us
Fig. 5b: Removing the belt end piece
Fig. 5d: Attaching the abduction block
item code: 804
item code: 820/1
item code: 818
item code: 819
item code: 817
9