Receiver Lights - Hive Active Heating Installation Manual

Receiver lights and what they mean
The receiver has lights on its front panel to indicate what it's doing. A single channel receiver has
two lights – 'Status' and 'Central heating'. A dual channel receiver has an additional light for 'Hot water'.
This is what the lights mean:
Light Colour
Central Green
heating
Central Green
heating
Hot water Green
Hot water Green
Status Green
10
Pattern Meaning
Solid Heating is on.
Flashing Commands queued. The
receiver has received 2 or
more commands to switch
the boiler on or off within
1 minute.
Hot water is on.
Solid
Flashing Commands queued. The
receiver has received 2 or
more commands to switch
the boiler on or off within
1 minute.
Solid Normal operation.
Notes
The Hive receiver protects the boiler from damage
that may occur if it's switched on and off very
quickly. Once the boiler has been switched on (or
off), it will not change state again for 1 minute as a
protective measure.
This light is only present on dual channel receivers.
See 'Central heating'.
The receiver is connected to the rest of the Hive
system and operating normally.