Toshiba e-STUDIO203 Service Handbook page 126

(3) Close the ADF and check if the positioning
pins fit the holes on the ADF.
[B] Adjustment
If the pins cannot be fitted into the holes, perform the adjustment according to the following procedure.
(1) Remove the right-hand hinge screw at the
rear side.
(2) Loosen the left-hand hinge screw at the rear
side.
e-STUDIO163/203 ADJUSTMENT
3 - 46
Fig. 3-39
Fig. 3-40
Fig. 3-41
December 2005 © TOSHIBA TEC