Error Messages - DeWalt DCT419 Instruction Manual

accurately matches the application will help improve accuracy of
detecting embedded materials.
Battery Fuel Gauge
The display on the hand-held wall scanner includes a battery
fuel gauge (R) which consists of four yellow segments that
indicate the level of charge remaining in the 12V Max*
battery pack. When the level of charge in the battery is
below the usable limit, the last segment of the battery fuel
gauge will turn red to indicate that the battery will need to
be recharged.
NOTE: The battery fuel gauge is only an indication of the charge left
on the battery pack. It does not indicate product functionality and is
subject to variation based on product components, temperature and
end-user application.
Tracking Bar
The tracking bar (S) at the bottom of the main viewing screen gives a
macro overview of the number of embedded materials located during
the pre-scan data mapping process.
The current position of the hand-held wall scanner is indicated by the
brackets and shaded area.
When the brackets reach the far left or right of the tracking bar, this
indicates the end of the data mapped during the pre-scan process. At
this point, the main scanning window (O) will also become dark.
The tracking bar can be helpful in indicating which way to move the
hand-held wall scanner to identify additional embedded materials
behind the wall surface.

Error Messages

SCANNING TOO FAST
If the scanning speed exceeds the maximum processing speed of the
hand-held wall scanner, the below error message will appear:
Remove the hand-held wall scanner from the wall.
When the "Begin Scanning" screen appears on the display, place the
hand-held wall scanner on the wall to restart the scan.
14