Error Messages - DeWalt DCT418S1 Instruction Manual

Battery Fuel Gauge
The display on the hand-held radar scanner includes a
battery fuel gauge (R) which consists of four yellow
segments that indicate the level of charge remaining in the
12V Max* battery pack. When the level of charge in the
battery is below the usable limit, the last segment of the
battery fuel gauge will turn red to indicate that the battery
will need to be recharged.
NOTE: The battery fuel gauge is only an indication of the charge left
on the battery pack. It does not indicate product functionality and is
subject to variation based on product components, temperature and
end-user application.
Tracking Bar
The tracking bar (S) at the bottom of the main viewing screen gives a
macro overview of the number of objects located during the pre-scan
data mapping process.
The current position of the hand-held radar scanner is indicated by the
brackets and shaded area.
The tracking bar can be helpful in indicating which way to move the
hand-held radar scanner to identify additional objects behind the wall
surface.

Error Messages

SCANNING TOO FAST
If the scanning speed exceeds the maximum processing speed of the
hand-held radar scanner, the below error message will appear:
Remove the hand-held radar scanner from the wall.
When the "Begin Scanning" screen appears on the display, place the
hand-held radar scanner on the wall to restart the scan.
SCANNING TOO SLOW
If the scanning speed is below the minimum processing speed of the
hand-held radar scanner, the following error message will appear:
Remove the hand-held radar scanner from the wall.
When the "Begin Scanning" screen appears on the display, place the
hand-held radar scanner on the wall to restart the scan.
14