Configuration Software - Risco Agility Installer Manual

Agility Installer Manual

4.3 Configuration Software

The Configuration Software menu contains parameters that enable the configuration
software to establish connection with the system.
Communication: Configuration software
Parameter
Security
Enables you to set parameters for remote communication between the technician and the
system using the Configuration software
Access Code
Enables you to define an Access Code that is stored in the system.
RISCO Group recommends using a different 4‐digit Access Code for each
installation.
In order to enable communication between the alarm company and the system
the same Access Code must subsequently be entered into the corresponding
account profile created for the installation in the configuration software
For successful communication, the Access Code along with the ID code must
match between the configuration software and the system.
Remote ID
Defines an ID Code that serves as an extension of the Access Code.
In order to enable communication between the alarm company and the
Installation, the same Remote ID code must be entered into the account profile
in the configuration software.
For successful communication, the ID Code along with the Access Code must
match between the Upload/Download software and the Main Panel.
Dealers often use the customerʹs Monitoring Station Account Number for the
ID Code, but you can use any 4‐digit code unique to the installation
Default
5678
Page 4-55
Range
0001