Vfo/Memory Switch; Memo Pad-Write Switch; Memory Write Switch/Memory Clear Switch; Tuning Step-Repeater Group Switch - Icom IC-9100 Instruction Manual

1
PANEL DESCRIPTION
Front panel (continued)
#8 VFO/MEMORY SWITCH [VFO/MEMO]
Push to switch between the VFO and memory
modes. (pp. 34, 139)
Hold down for 1 second to copy the memory con-
tents to the displayed VFO on the MAIN Band.
(p. 142)
#9 MEMO PAD-WRITE SWITCH [MP-W] (p. 144)
Push to write the displayed data into a memo pad.
10 in the "Memopad Numbers" item of the Set mode.
(p. 164)
$0 MEMORY WRITE SWITCH [MW] (p. 140)
Hold down for 1 second to store VFO data into the
selected memory channel.
$1 MEMO PAD-READ SWITCH [MP-R] (p. 144)
Push to sequentially call up the contents from the
memo pads.
The 5 (or 10) most recently programmed frequen-
cies and operating modes can be recalled, starting
from the most recent.
10 in the "Memopad Numbers" item of the Set mode.
(p. 164)
7
#8 #9 $ 0 $1 $2
$2 MEMORY CLEAR SWITCH [M-CLR] (p. 141)
In the Memory mode, hold down for 1 second to
clear the memory channel.
This switch is disabled in the VFO mode.
$3
Push to toggle between the kHz and MHz* quick
tuning step, or turn OFF the quick tuning.
* When the HF/50 MHz frequency band is selected,
MHz step cannot be selected.
Z" quick tuning icon is displayed above
the kHz or MHz digit, the frequency is changed in
programmed quick tuning steps or 1 MHz steps.
changed in 10 Hz steps.
When the quick tuning is ON, hold down for
1 second to display the "TS" screen (Tuning Step)
to select the quick tuning step. (p. 38)
steps are independently selectable for each operat-
ing mode.
When the quick tuning is OFF, hold down for
1 second to turn the minimum tuning step of
1 Hz ON or OFF. (p. 39)
(Only when "
Push to switch the call sign group.
Hold down for 1 second to enter the repeater call
sign group selection mode.
≈" blinks.
When in the repeater group selection mode,
push to cancel it.
$3 $4
$5
$6
$7
$8
$9
%0
(p. 38)
(p. 93)
" is displayed.)