Sanyo VDC-D1785IRVP Instruction Manual

INSTRUCTION MANUAL
Vandal-resistant IR Dome Camera
About this manual
Before installing and using the camera, please read this manual
carefully. Before to keep it handy for later reference.
Dimension:mm (inches)
Depending on the conditions of use, installation and environment, please be
sure to make the appropriate settings and adjustments. If you need help with
installation and or settings, please consult your dealer or authorized Sanyo
Service Center.

TROUBLESHOOTING

Before sending the camera out for repair, check the items below.
If the problem persists after checking these items, consult your dealer or
authorized Sanyo Service Center.
If no image appears
Is the coaxial cable attached securely?
Are the power and voltage normal?
Has the iris of the lens been adjusted correctly (with level volume)?
Is there adequate illumination?
If the image is unclear
Is the monitor adjusted correctly?
Is the lens in focus?
Is the lens clean?
Dirt or fi ngerprints on the lens can adversely affect the image. Gently wipe and
dirt of fingerprints off the lens a soft cloth or lens cleaning paper and cleaning
fl uid (commercially available).
SERVICE
The camera is precision instrument. Handle it carefully and always follow the
safety precautions. If the camera requires service, never try to repair it yourself
or open the casing. For servicing, maintenance, or repairs, consult your dealer
or authorized Sanyo Service Center.
For EU Users
Please note:
Your SANYO product is designed and manufactured with high quality
materials and componets which can be recycled and reused.
This symbol means that electrical and electronic equipment, at their end-of-
VDC-D1785IRVP
life, should be disposed of separately from your household waste.
Please dispose of this equipment at your local community waste collection/
recycling centre.
In the European Union there are separate collection systems for used
electrical and electronic product.
Please help us to conserve the environment we live in!
This symbol mark and recycles system are applied only to EU countries and
not applied to countries in other areas of the world.
SANYO FISHER Sales (Europe) GmbH
Stahlgruberring 4, D 81829 Munich, Germany
SANYO Electric Co., Ltd.
1-1, Sanyo-cho, Daito City, Osaka 574-8534, Japan
For Russian Users
This product certifi ed by offi cal certifi cation company which is
authorized by Russian Federation.
ДЛЯ ПОЛЬЗОВАТЕЛЕЙ РОССИИ
Данная продукция сертифицирована официальным
МО04
органом по сертификации Российской Федераци.

SPECIFICATIONS

Model Number
Scanning system
Image sensor
Number of effective pixels
Horizontal resolution
Lens
Minimum illumination (50IRE)
Video/ Monitor output
Video S/N ratio
Day & Night
Backlight compensation
White balance
Auto iris drive
AGC gain
Flickerless
Gamma correction
Sync system
Unshielded Twisted Pair
IR LED
IR distance
IR wavelength
Operating temperature
Operating humidity
Power supply
Power consumption
Weather Protection class
Dimensions ( x H)
Weight
Accessories
Appearance and specifi cations are subject to change without prior notice.
INSTALLATION
VDC-D1785IRVP
PAL standard 625 lines, 50fields/sec.
1/3" Interlace CCD sensor
752(H) x 582(V)
540 TV lines (Typical)
f=3.7 to 12mm, F1.4, IR lens
0.7lx LED-Off, 0.0lx LED-ON
1.0Vp-p (75ohms, composite)
More than 48dB
True Day/ Night
ON/ OFF
Auto
DC
ON/ OFF
ON/ OFF
0.45
Internal
Passive type
18 pcs
20m
850nm
-10°C to +50°C (14°F to 122°F)
Less than 90% (no condensation)
12VDC+/-10%, 24VAC+/-10%, 50Hz
7.0w
IP67
150.1 x 129mm (5.9" x 5.1)
Approx. 0.95kg(33.5oz) In-ceiling mount
1.20kg(43.7oz) Surface mount
1.Wall Mounting template....... ......1
2.Inceiling Mounting template... ....1
3.Installation Manual......... . ........1
4.Conduit cap.................. ..........1
5.Fixing screw (P4*31TP).............4
6.Wall plugs............... ...............4
7.Fixing scerw (M4x0.7P x15mm)..3
8.Monitor out cable.....................1
9.Hexagonal wrench.................1
10.Surface-mount adaptor...........1
PRECAUTIONS
■ Protect from humidity and dust
■ In case of a probelm
Do not use the unit if smoke or a strange odor comes To prevent damage, do not installl the unit where there is
from the unit, or if it seems not to function correctly. Turn greasy smoke or steam, where the humidity may get too
high, or where there is a lot of dust.
off the power immediately and disconnect the power
cord, and then consult your dealer or an Authorized
Sanyo Service Center. ■ Protect from high temperatures
Do not install close to stoves, or other heat sources, such
as spotlights, etc., or where it could be subject to direct
■ Do not modify
Do not modify the cabinet and camera, as it maybe sunlight, as this could cause deformation, discoloration or
dangerous and cause of damage to the unit. For repairs, damage.
consult your dealer or an Authorized Sanyo Service
■ Cleaning
Center.
* Dirt can be removed from the cabinet by wiping it with
■ Do not put objects inside the unit a soft cloth. To remove stains, wipe with a soft cloth
moisteried with a soft detergent solution and wrung dry, then
Make sure that no metal objects or fl ammable substance
get inside the unit. If used with a foreign object inside, it dry by wiping with a soft cloth.
could cause a fi re, a short-circuit or damage. Be careful * Do not use benzine, thinner or other chemical products
on cabinet, as this may cause deformation and paint
to protect the unit from rain, sea water, etc. If water or
peeling. Before using a chemical cloth, make sure to read
liquid gets inside the unit, turn off the power immediately
and disconnect the power cord, and then consult your all accompany instructions. Make sure that no plastic or
dealer or an Authorized Sanyo Service Center. rubber material comes into contact with the cabinet for a
long period of time, as this may cause damage or paint
■ Be careful when handling the unit peeling.
To prevent damage, do not drop the unit or subject it to
strong shock or vibration. ■ Degree of protection: IP67
This unit has been certifi ed to IP67 standards when properly
■ Do not install this unit close to magnetic fi elds installed. Use only an IP67 certified enclosure or an
The magnetic fi elds may result in unstable operation. electrica box. Ensure all openings in enclosure are sealed
as per manufacture's instructions.
For Surface Mount
For Inceiling Mount Since the conduit hole cover is not waterproof-
installation installation finished, always be sure to seal the cover entirely
-Inceiling type- -Surface type- by caulking, for example, upon completion of
installation.
Make sure to perform waterproofi ng properly to the
ceiling or wall where you are installing the unit.
(A)
When setting up this camera, make sure that it
is installed securely. Check that the installation
location is strong enough to bear the camera
unevenness. In addition, do not touch the camera
unit except when settings and adjustment are
necessary.
(B)
1.
Loosen the 3 fi xing screws using the supplied
hexagonal wrench and remove the dome cover.
2.
for inceiling" on the mounting surface, and mark 3
positions shown in.
(C)
or
Surface : Place the supplied "Mounting template for
surface" on the mounting surface, and mark 4 positions
shown in.
(#1)
3.
supplied screw holes in the holes.
(D)
4.
cables.
5.
from the camera unit through the cable hole in the
ceilling or the wall.
6.
Align the unit mounting holes of the camera unit with
(E) the holes in the ceilling or the wall.
7.
Secure with the supplied mounting screws.
8.
camera. Refer to "CONNECTIONS AND SETTINGS"
for camera settings and lens adjustments.8.
(F)
* When routing the cables on ceiling or wall surface:
Loosen the conduit hole cover fi xing screw on the back
of the camera unit base with the hexagonal wrench,
open the cover, and pass the connection cables
through the conduit hole.
HINT
(#1) Press the grip portion to remove the mask before
adjustment.
Sanyo Electric Co., Ltd
Printed in Taiwan
CAUTION
Inceiling : Place the supplied "Mounting template
Drill holes at positions as marked and insert the
Cut a hole in the ceilling or the wall for routing the
Pass the power cable, video cable and UTP cable
Carry out the settings and adjustments for the