Advertisement
Quick Links
INSTRUCTION MANUAL
BEDIENUNGSANLEITUNG
MANUEL D'INSTRUCTIONS
COLOUR CCD camera
CCD-Farbkamera
Caméra CCD COULEUR
CCD
About this manual
Before installing and using the camera, please read this manual
carefully. Be sure to keep it handy for later reference.
Über diese Bedienungsanleitung
Lesen Sie bitte vor der Montage und dem Inbetriebnehmen der
Kamera zuerst diese Bedienungsanleitung sorgfältig durch und
bewahren Sie sie zum späteren Nachschlagen auf.
VDC-D1185VP (SURFACE TYPE)
A propos de ce manuel
Avant d'installer et d'utiliser la caméra, veuillez lire ce
manuel attentivement. Gardez-le à portée de main pour
toute référence ultérieure.
VDC-D1185VP
VDC-D2185VP
VDC-D2185VP (IN-CEILING TYPE)
Advertisement
Related Manuals for Sanyo VDC-D1185VP
Summary of Contents for Sanyo VDC-D1185VP
- Page 1 BEDIENUNGSANLEITUNG MANUEL D’INSTRUCTIONS COLOUR CCD camera CCD-Farbkamera Caméra CCD COULEUR VDC-D1185VP (SURFACE TYPE) VDC-D2185VP (IN-CEILING TYPE) About this manual A propos de ce manuel Before installing and using the camera, please read this manual Avant d’installer et d’utiliser la caméra, veuillez lire ce carefully.
-
Page 2: Table Of Contents
TROUBLESHOOTING ................11 • Dual power supply 12 – 15 V DC or 24 V AC. SPECIFICATIONS ..................12 ACCESSORIES VDC-D1185VP • Hexagonal Wrench (Big)............1 pc. • Hexagonal Wrench (Small) ............1 pc. • Cushioning sheet..............1 pc. • Ferrite core ................2 pc. -
Page 3: Precautions
Disconnect the power greasy smoke or steam or where the dampness may get too high. supply immediately, and consult your dealer (or a Sanyo Authorized Protect from high temperatures Service Centre). -
Page 4: Installation
• Cable type RG-59U (3C-2V), 250 m maximum. • Cable type RG-6U (5C-2V), 500 m maximum. • Cable type RG-11U (7C-2V), 600 m maximum. Installing the Model VDC-D1185VP Use the supplied hexagonal wrench to remove the four fixing screws (B) of dome cover (A). - Page 5 INSTALLATION Connections Pass the power cable/day-night cable (G) and video cable (H) from the camera unit through the cable hole in the ceiling. DC 12 V connection AC 24 V connection (Power cable/day-night cable) DC12 AC24 Cable – ~ ~ GND Power cable –...
-
Page 6: Settings
SETTINGS The illustration shows the factory default settings for the switches in the camera setup section. When changing the settings and adjustments for this camera, loosen the camera unit screw (A) and remove the lens unit in the direction of the arrow. - Page 7 SETTINGS C • • • • B/W (colour/black and white) switch setting High speed electronic shutter setting This switch lets you select the timing of the automatic switching of Normally, the speed setting switches for the high speed electronic the optical filter to colour image or black and white image, according shutter are all set to the down (OFF) position.
- Page 8 SETTINGS (BL-M mode: 64 sections) Backlight compensation setting This camera has two different backlight compensation functions: Normally backlight compensation switch 5 (BL-M) and 6 (BL-C) are set to the down (OFF) position. Change the backlight compensation switch settings depending on the conditions. •...
-
Page 9: White Balance Adjustment
SETTINGS White balance adjustment Line phase adjustment Normally the switch 7 (WB) is set to the down (ATW: auto white When using a camera switcher to connect 2 cameras or more to one balance) position and the white balance is adjusted automatically. If a monitor, there may be a vertical roll of the images when switched. - Page 10 SETTINGS Manual colour/black and white setting Lens iris adjustment Connect each cable as indicated below, to set the image to black and You will need to set the LEVEL (VR121) volume when shooting in the white or colour as desired. conditions described below.
-
Page 11: Adjustment
Loosen the pan adjustment screw, adjust the panning position of the lens and then re-tighten the screw. Model: VDC-D1185VP Remove the lens unit A from the pan chassis, loosen the pan adjustment screw B, turn the chassis to adjust the panning position to a position where one of the three screw holes C is visible, and then re tighten the screw. -
Page 12: Troubleshooting
If it still does not perform When setting up the camera, connect a monitor to this video output correctly, please consult your dealer or a Sanyo Authorized Service pin and to the GND screw using alligator clip cables, then using the Centre. -
Page 13: Specifications
: 795 (H) x 596 (V) Power consumption : 2.9 W Effective picture elements : 752 (H) x 582 (V) Weight : VDC-D1185VP: Approx. 1,350 g Synchronizing system : Internal sync, Line lock VDC-D2185VP: Approx. 1,015 g Resolution : 520 TV lines horizontally, 400 TV lines... - Page 14 Printed on recycled paper Gedruckt auf recyceltem Papier Imprimé sur du papier recyclé Sanyo Electric Co, Ltd. 1AC6P1P2678-- Printed in Japan L5AK4/XE, L5AL4/XE (0603KP-CZ)