Pyrolytic Cleaning ^ Of The Oven Interior; Before Running The Pyrolytic Cleaning Programme - Miele H 2661 BP Operating And Installation Instructions

Hide thumbs Also See for H 2661 BP:
Table of Contents

Advertisement

Pyrolytic cleaning ^ of the
oven interior
Instead of cleaning the oven manually
you can run the Pyrolytic cleaning
programme ^.
During the Pyrolytic cleaning
programme the oven interior is heated
up to over 430 °C. Any residual soiling
is broken down and reduced to ash by
the high temperatures.
This oven has three levels of pyrolytic
cleaning, each with a different duration.
Select:
– Level 1 for light soiling
– Level 2 for heavier soiling
– Level 3 for very heavy soiling
For safety reasons the oven door is
automatically locked at the beginning of
the Pyrolytic cleaning programme.
It cannot be opened until the
programme has finished.
The timer can be used to delay the start
time of the Pyrolytic cleaning
programme, for instance to make use of
cheaper electricity tariffs.
At the end of the pyrolytic cleaning
programme any residues such as ash
from the pyrolytic process can be easily
wiped away.
Cleaning and care
Before running the Pyrolytic cleaning
programme
Remove all accessories as well as
the runners and any extra
accessories such as FlexiClip
runners from the oven interior before
starting the Pyrolytic cleaning
programme.
The high temperatures needed for
pyrolysis will damage them.
^ Take the side runners out (see
"Cleaning and care – Removing the
side runners with FlexiClip runners"")
and .remove any other accessories
from the oven cavity.
If not removed coarse soiling can
smoke and cause the Pyrolytic
cleaning programme to switch itself
off.
^ It should be removed before running
the Pyrolytic cleaning programme.
73

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

H2361bpH2661bp

Table of Contents