Connecting Video Components; Connecting Dvd 6-Channel Jack; Connecting The Antennas - Kenwood KRF-V5010 Instruction Manual

Connecting video components

SUB
WOOFER CENTER
REC OUT PLAY IN PLAY IN
FRONT SURROUND
VIDEO 2 / MONITOR VIDEO 1 DVD 6CH. INPUT
Video Inputs
(Yellow RCA
pin cord)
VIDEO IN
DVD player or LD player
OUT
Video deck
OUT
IN
Audio inputs and outputs
(Red and white RCA pin cords)

Connecting DVD 6-channel jack

SUB
WOOFER CENTER
FRONT SURROUND
DVD 6CH. INPUT
FRONT
SURROUND
SUBWOOFER
DVD player equipped with
six channel output jacks, etc.
VIDEO 1
VIDEO 2
MONITOR
VIDEO 2
VIDEO OUT VIDEO IN
Monitor TV
OUT
IN
OUT
Video inputs and outputs
(Yellow RCA pin cords)
6CH. INPUT
VIDEO 1
VIDEO 2
MONITOR
VIDEO 2
VIDEO OUT VIDEO IN
CENTER
VIDEO OUT

Connecting the antennas

Antenna terminal connections
1 Push lever. 2 Insert cord.
AM loop antenna
The supplied loop antenna is for use indoors. Place it as far as possible
from the receiver, TV set, speaker cords and power cord, and adjust the
direction for best reception.
FM indoor antenna
The supplied indoor antenna is for temporary use only. For stable signal
reception we recommend using an outdoor antenna. Disconnect the
indoor antenna when you connect one outdoors.
FM outdoor antenna
Lead the 75 coaxial cable connected to the FM outdoor antenna into
the room and connect it to the FM 75
ANTENNA
AM
GND
FM
75
Use an antenna
adaptor
(Commercially
available)
Setting up the system
KRF-V7010/V6010/V5010 (En/T)
3 Return lever.
terminal.
AM loop
antenna
FM indoor antenna
FM outdoor antenna
9