Connecting Video Components; Connecting The Antennas; Connecting Dvd 6-Channel Jack - Kenwood VR Series Instruction Manual

Connecting video components — Connecting the antennas
SO OSSD BST NST So OS tte a i si OSS eS G E G E N OLR ED SES NESS SON SEMEL ie REG ISS BOD SSG POLES ESE OPED ESSE ILISOBSSEBEE SBE SNORE ONES ALE NNOP SNE aes,
Antenna terminal connections
@ Push lever. @ insert cord. © Return lever.
1OGodo0:0|0,0
O10 Gdd.0 01010)
AM Ioop antenna
The supplied loop antenna is for use indoors. -Place it as far as possible
from the receiver, TV set, speaker cords and power cord, and adjust the
direction for best reception. :
FM indoor antenna
The supplied indoor antenna is for temporary use only. For stable signal
reception we recommend using an outdoor antenna. Disconnect the
indoor antenna when you connect one outdoors.
FM outdoor antenna -
Lead the 75Q coaxial cable connected to the FM outdoor antenna into
the room and connect it to the FM 75Q.terminal.
" CABLE READY terminal (For VR-257 only)
Video Inputs
(Yellow RCA
pin cord)
VIDEO IN
OUT
antenna
Audio inputs and outputs Video inputs and outputs
(Red and white RCA pin cords) (Yettow RCA pin cords)
Connecting DVD 6-channel jack
Use an antenna
adaptor
(Commercially
avaiable)
* Refer to the separate "INSTRUCTION MANUAL for CATV tuner 7
function" for information on usigng the CABLE READY (TV) termi-
nal.
| o. -FRONT-}-—-f --
SURROUND
SUBWOOFER
VIDEO OUT
DVD ptayer equipped with
six channel output jacks, ete.