Miele KFN 37432 iD Operating And Installation Instructions page 57

The compressor is switching on less frequently than it should and for
shorter periods of time, so the temperature in the appliance is increasing.
Problem
The temperature
inside the appliance
is too high.
Frozen food is
starting to thaw.
Messages in the display
Problem
F0 to F9 appears in
the display.
FE* appears in the
display.
The alarm symbol ;
and the sensor for
one of the sections
light up, and an
audible alarm also
sounds.
Possible cause
This is not a fault.
The room temperature is
lower than the ambient
temperature required for
the appliance.
Operating in a room which
is too cold will cause the
compressor to switch off for
too long causing the freezer
section to become too
warm.
Possible cause
There is a fault.
There is a fault.
The door alarm has been
activated.
Problem solving guide
Remedy
^ Set the correct
temperature setting.
^ Check the temperature
again in 24 hours time.
^ See "Installation -
Location" for more
information.
^ Raise the temperature in
the room.
Remedy
^ Call Miele Service.
^ Call Miele Service.
^ Close the door. The alarm
symbol ; will go out and
the audible alarm stops.
57