Switching on Sabbath mode
^ Touch the settings sensor.
All symbols available for selection
appear in the display and the 0 symbol
flashes.
^ Touch the sensors for setting the
temperature (X or Y), repeatedly until
the ¬ symbol flashes.
^ Touch the OK sensor to confirm your
selection.
The last selected setting flashes and
the ¬ symbol lights up in the display.
^ By touching the X or Y sensor you
can now switch on Sabbath mode. To
do this, select setting 1.
^ Touch the OK sensor to confirm your
selection.
Selecting further settings
The selected setting is applied, the ¬
symbol flashes. Sabbath mode is
switched on.
Switching off Sabbath mode
^ Touch the settings sensor.
The ¬ symbol and the selected setting 1
lights up in the display.
After a short while the display will
change: All symbols available for
selection light up, the ¬ symbol flashes
and the setting 0 lights up. Sabbath
mode is switched off.
^ Touch the settings sensor to leave
settings mode.
Otherwise the appliance exits
settings mode automatically after
approximately one minute.
37