Security Code Setup - Kenwood DNX7220 Instruction Manual

Setup Menu

Security Code Setup

You can set a security code to protect your
receiver system against theft.
⁄
• When the Security Code function is activated, it cannot
be released.
Note that your Security Code is in the 4 digit number
entered in your "Car Audio Passport" in this package.
1 Display the Security Code Setup screen
Touch
Menu" screen (page 60).
1
2
1 Displays the Security code input screen.
2 Turns the SI function on or off.
If turned "On", the burglar alarm lamp
flashes when the vehicle ignition is off.
( "On")
3 Returns to the original screen.
2 Start Security Code setup
⁄
• If you have already completed the code registration, you
cannot touch [Set].
3 Enter a security Code
Input four-digit number.
72 DNX7220
4
5
⁄
in the "SETUP
• If you enter a different security code, the screen returns
6
3
Register your security code
Reenter the security code
Reenter the same security code as that you
have entered in Step 3 for confirmation.
to Step 3 (for the first code entry).
Register the security code again
Now, your security code is registered.
If you press the Reset button or if you
disconnect your receiver from the battery after
the code registration, you need to enter the
registered security code.