Huawei D100 User Manual page 16

How do I check the signal strength of the
3 network on my router?
Login to the Router Management Interface.
You will notice five icons in the top right
corner of the page.
3UK: the signal indicator for when roaming
outside of the UK.
SIM: informs you that the modem has
detected the SIM card.
WLAN: informs you that the wireless LAN
function is turned on.
3G or HSDPA: shows that the modem has
discovered and connected to the 3 3G or
HSDPA network.
SIG: shows the strength of the 3 network. One
green bar is for a weak signal and five bars for
strong. Move your D100 router near to a
window to improve signal strength and
performance.
I forgot my password how can I reset it?
To reset your Router Management Interface
password, you must reset your router to the
factory default settings.
0820801 D100 UG.AW2.indd 15
I have turned off DHCP and still want to
connect without resetting my router.
How can I do this?
We don't recommend you do this. Please reset
your router to factory settings. If you do wish
to continue, please consult your computer's
manual on how to manually configure an IP
address for your computer.
I have connected my Huawei E160G
modem into the router, but I can't read
the memory card.
It's not possible to read the memory card on
this device through the D100 router. To access
the contents of the memory card, please
connect the memory card to your PC through
a card reader. Or connect your dongle, with
the memory card in, directly to your computer
using a USB port.
15
19/9/08 09:56:21