Speaker Setting; Switching Display - Kenwood KDC-5023 Instruction Manual

General features

Speaker Setting

Fine-tuning so that the System Q value is optimal when setting
the speaker type.
1
Enter Standby
Press the [SRC] button.
Select the "ALL OFF" display.
2
Enter Speaker Setting mode
Press the [System Q] button.
3
Select the Speaker type
Press the [4] or [¢] button.
Each time the button is pressed the setting switches as shown
below.
Speaker type
OFF
For 5 & 4 in. speaker
For 6 & 6x9 in. speaker
For the OEM speaker
4
Exit Speaker Setting mode
Press the [System Q] button.

Switching Display

Switching the information displayed.
Press the [DISP] button.
Each time the button is pressed the display switches as shown
below.
Display
"SP OFF"
"SP 5/4Inch"/ "SP 5/4"
"SP 6*9/6Inch"/ "SP 6*9/6"
"SP O.E.M."/ "SP OEM"
— 10 —
In Tuner source
Information
Station name
(KDC-MPV7023/6023/5023 only)
Radio text, Program Service name
or Frequency (KDC-5023R only)
Frequency
(KDC-MPV7023/6023/5023 only)
Clock
The frequency is displayed during Program Service name
reception (KDC-5023R only)
Press the [DISP] button for at least 1 second.
The frequency for the RDS station will be displayed for 5
seconds instead of the Program Service name.
In CD & External disc source
KDC-MPV7023/6023 :
Information
Disc title (In External disc source or
KDC-MPV7023 internal CD source)
Track title (In External disc source or
KDC-MPV7023 internal CD source)
Track number & Play time
Disc name
Clock
KDC-5023R/5023 :
Information
Disc title (In External disc source)
Track title (In External disc source)
Track number & Play time
Disc name
Clock
Display
"SNPS"
"R-TEXT"
"BAND+FREQ"/ "BAND+F"
Display
"D-TITLE"
"T-TITLE"
"P-Time"
"DNPS"
Display
"D-TITLE"
"T-TITLE"
"P-TIME"
"DNPS"