Playing Cd & Audio File; Fast Forwarding And Reversing; Track/File Search; Disc Search/Folder Search - Kenwood KDC-3028 Instruction Manual

CD/Audio file/External disc control features
Playing CD & Audio file
When there is no disc inserted
1
Drop open the faceplate
Press the Release button.
2
Insert a disc.
3
Push the faceplate on the left side, and return
it to its former position.
• When the faceplate has been dropped open, it might
interfere with the shift lever or something else. If this
happens, pay attention to safety and move the shift
lever or take an appropriate action, then operate the
unit.
• Do not use the unit with the faceplate in the open
condition. If it's used in the open position dust can
enter the inside part and cause damage.
• Refer to <About AAC, MP3 and WMA> (page7) for the
Audio file by models which can be played.
• When a disc is inserted, the "IN" indicator is ON.
When a disc is inserted
Press the [SRC] button.
Select the "CD" display.
Pause and play
Press the Control knob.
Each time the knob is pressed, it pauses and
plays.
Eject the disc
1
Drop open the faceplate
Press the Release button.
2
Eject the disc
Press the [0] button.
3
Press the faceplate on the left side, and
return it to its former position.
16
|
English

Fast Forwarding and Reversing

Fast Forwarding
Hold down on [¢] of the Control knob.
Release your finger to play the disc at that point.
Reversing
Hold down on [4] of the Control knob.
Release your finger to play the disc at that point.
• The sound is not output while the Audio file is being
searched.
• Fast Forwarding and Reversing cannot be done while
AAC file is being played.

Track/File Search

Searching for a song on the disc or in the Audio
file folder.
Push the Control knob to [4] or [¢].
Function of disc changer/ Audio file

Disc Search/Folder Search

Selecting the disc set in the Disc changer or the
folder recorded on the Audio file media.
Push the Control knob to [FM] or [AM].
Function of remote

Direct Track/File Search

Doing Track/File Search by entering the track/file
number.
1
Enter the track/file number
Press the number buttons on the remote.
2
Do Track/File Search
Press the [4] or [¢] button.
Canceling Direct Track/File Search
Press the [38] button.