Subwoofer Output; Dimmer Control - Kenwood KDC-3028 Instruction Manual

In Audio file source
(KDC-MP4028/KDC-MP428)
Information
Song title & Artist name*
Album name & Artist name*
Folder name
File name
Track number & Play time
Clock
In HD Radio source
Information
Station name*
Song title*/ Artist name*/
Album name*/ Genre*
Frequency
Clock
In Auxiliary input source
Information
Auxiliary input name
Clock
3
Exit Switching Display mode
Press the Control knob.
• * If the contents of the information cannot be
displayed, Play time or Frequency is displayed.
• When the clock display is selected, the display setting
of each source will be switched to the clock display.
(KDC-3028/KDC-328 only)
• Album name cannot be displayed in WMA file.
• Song title, Artist name, and Album name cannot be
displayed in AAC file.
Display
"TITLE"
"ALBUM"
"FOLDER"
"FILE"
"P-TIME"
"CLOCK"
Display
"ST NAME"
"TITLE"
"FREQ"
"CLOCK"
Display
"SRC NAME"
"CLOCK"
Function of the KDC-MP4028/KDC-MP428

Subwoofer Output

Turning the Subwoofer output ON or OFF.
Hold down on [AM] of the Control knob for at
least 1 second.
Each time the button is pressed, Subwoofer
output switches ON and OFF.
When it's ON, "SW ON" is displayed.
• You can control this function when <Switching
preout> (page 22) is set to "SWPRE SW". (KDC-MP428
only)
Function of the KDC-3028/KDC-328

Dimmer Control

You can change the unit's display to dimmer.
Press the [DIM] button for at least 1 second.
Each time the button is pressed for 1 second, the
Dimmer contol turns ON and OFF.
When it's ON, "DIM ON" is displayed.
11
|
English