Deletion Of Files From A Floppy Disk; Sending File Data To The Er-02Fd - Sharp ER-A570 Programming Manual

4-4) Deletion of files from a floppy disk

This function causes the ECR to send a file delete command to the
ER-02FD.
Procedure for PGM job #895
895 X (FILE No.)
Any specified file can be deleted from a floppy disk in the ER-02FD
connected the ECR by performing the above job.
The ECR displays "(FILE NAME) DEL?" when the TL key is pressed
after the entry of a file number in the above procedure.
To delete the file, it is necessary to press the TL key; and to cancel
the file deletion, it is necessary to press
Each file number is peculiar to respective ECR models.
PRINT FORMAT
When file deletion has successfully terminated:
#0895 ∗Π Γ Μ ≤ ∗
δελετε
φ1100111. δατ
When file deletion has been canceled:
#0895 ∗Π Γ Μ ≤ ∗
δελετε
φ1100111. δατ χανχελ
DISPLAY FORMAT
DELETE/CANCEL
F1100111 DEL?
During deletion
DELETE F1100111

4-5) Sending file data to the ER-02FD

This function causes the ECR to send files to the ER-02FD.
Procedure for PGM job #896
896 X (FILE No.)
The ECR can send specified files to a floppy disk in the ER-02FD
connected to it when the above job is performed.
If a specified file is not present in the floppy disk, the corresponding
file is created, and if a specified file is present in the floppy disk, that
file is deleted and new file data is written to the disk.
If any specified file is not present in the ECR, a "ENTRY ERROR"
error occurs.
The ECR displays "(FILE NAME) SEND?" when the TL key is
pressed after the entry of a file number in the above procedure. To
send the file, it is necessary to press the TL key; and to cancel the
send operation, it is necessary to press the
To preform file deletion
ST TL X
To cancel file deletion
X
⊗
key.
JOB CODE/MODE TITLE
οκ
TL TL To send file name
To cancel the send
X
file operation
⊗
key.
PRINT FORMAT
When the send operation has successfully terminated:
#0896 ∗Π Γ Μ ≤ ∗
σενδ
φ1100111. δατ
When the send operation has been canceled:
#0896 ∗Π Γ Μ ≤ ∗
σενδ
φ1100111. δατ χανχελ
DISPLAY FORMAT
SEND/CANCEL
F1100111 SEND?
During sending
SEND F1100111
The ER-02FD function checks the capacity of a floppy disk placed in
the ER-02FD before file data is sent to it.
If the disk capacity is found insufficient (or error 8 occurs) in this
checking, file data of the size that can be stored in that disk is sent to
the ER-02FD to create one file and the remaining data can be sent
after that disk has been replaced with a new floppy disk. This function
is called multi media function.
Example: Creation of a PLU transaction file (F1201111.DAT)
1. Creation of a PLU transaction file is attempted, but the disk
capacity is found insufficient.
PRINT FORMAT
#0896 ∗Π Γ Μ ≤ ∗
σενδ
DISPLAY FORMAT
F1100111
SEND OR CANCEL?
⊗
Either the
key (to send file data) can be entered.
2. The TL key is entered to create a file of the size that is within
the remaining capacity of the disk.
DISPLAY
SEND
™ 50 ™
JOB CODE/MODE TITLE
οκ
JOB CODE/MODE TITLE
ερρορ 8
OK?
key (to cancel the send operation) or the TL
FORMAT
F1201111