Sample Print Format; Formatting A Floppy Disk; Display Format; Reference To The Directory In A Floppy Disk - Sharp ER-A570 Programming Manual

Error Status No.
Floppy disk error (Formatting cannot be made
20
correctly.)
Floppy disk error (File cannot be read
23
correctly.)
the setting of the dip switch does not agree
24
with disk format.
"No connection" error (the ER-02FD is not
25
correctly connected.)
26 Receive error (Parity error)
27 Receive error (Check sum error)
28 Receive error (Buffer overflow error)
29 Hardware error
30 Power-off error (The ER-02FD is turned off.)
31 time-out error

SAMPLE PRINT FORMAT

A file deletion was attempted, but the floppy disk was protected
against writing.
#0895 ∗Π Γ Μ ≤ ∗
δελετε
φ1103456. δατ ερρορ10
4. Detailed Description of the ER-02FD
function

4-2) Formatting a floppy disk

This function causes the ECR to send a floppy disk format command
to the ER-02FD.
Procedure for PGM job #893
TL
893 TL
X
The floppy disk in the ER-02FD connected to the ECR can be format-
ted by performing the above job.
If any file is present in the floppy disk, the ECR displays "FD FOR-
MAT OK?" when the TL key is pressed after the
procedure.
To format the disk, it is necessary to press the TL key; and to cancel
the formatting, it is necessary to press the
PRINT FORMAT
When disk formatting has successfully terminated:
#0893 ∗Π Γ Μ ≤ ∗
φδ φορµατ
WRITE PROTECT ERROR
When no fike is present in the floppy disk.
To format the floppy disk when files
TL are resent in it.
To cancel the formatting of the floppy disk
X
when files are present in it.
⊗
key in the above
⊗
key.
JOB CODE/MODE TITLE
οκ
When disk formatting has been canceled:
#0893 ∗Π Γ Μ ≤ ∗
φδ φορµατ

DISPLAY FORMAT

FORMAT/CANCEL?
FD FORMAT OK?
During formatting
FD FORMAT 001
Counter
In floppy disk formatting the model name of the ECR is automatically
appended as a volume label.

4-3) Reference to the directory in a floppy disk

This function causes the ECR to print the directory in a floppy disk
placed in the ER-02FD.
Procedure for PGM job #894
894 TL
X
The directory in a floppy disk placed in the ER-02FD connected to the
ECR can be printed on the receipt and journal by performing the
above job.
PRINT FORMAT
When reference to the directory has successfully terminated:
#0894 ∗Π Γ Μ ≤ ∗
δι ρεχτορψ
φ1101111. δατ
φ010ξξξξ. δατ
φ1202222. δατ ∗∗∗∗
φ1303333. δατ
* The empty file refers to a file that contains no data items.
Such a file is created when a write error occurs due to a certain
cause during file creation by the ER-02FD, resulting in unusual file
creation.
When reference to the directory has terminated with an error:
#0894 ∗Π Γ Μ ≤ ∗
δι ρεχτορψ
φ1101111. δατ
φ010ξξξξ. δατ
™ 49 ™
ερρορ12
Files that are the same
in file name are present.
οκ
JOB CODE/MODE TITLE
EMPTY FILE *
(FILE No.)
ερρορ22
ERROR22
(FD ERROR)