Setting An Everyday Timer Program - Kenwood HM-382MD Instruction Manual

Setting an everyday timer program

In each of PROG.1 and PROG.2, the timer data including the operating period and played contents can
be set and selected to be activated or not as required.
Adjust the clock before setting the timer.
1
Make preparations for the play (recording).
To listen to CD
Insert a disc.
(Program playback is not possible.)
To listen to radio
The station should be preset prior
to the above.
÷ Timer reservation is possible for the two types PROG.1 and PROG. 2 at the same time.
÷ Please make reservations with an interval of at least one minute, so that the operation times of PROG. 1 and PROG. 2 do
not overlap.
2
Select the timer number.
1Select "TIMER SET ?".
menu
set/demo
(Press the set/demo key while
the "?" mark is blinking.)
2 Select "PROG. 1 SET ?" or
"PROG. 2 SET ?".
multi control
3 Set it.
(Press during display of the pro-
gram contents.)
O
To listen to MD
Load a disc.
(Program playback is not possible.)
Playing the auxiliary input source
Make timer setting of the compo-
¢
nent connected to the AUX input
jacks.
volume/
multi control
up
down
volume/
up
down
set/demo
(PRG. TIMER)
Set a tape into.
Make preparations for recording.
MD
TAPE
Turning the knob switches the display contents.
TAPE RVS.
REC MODE
A.MEMORY ? (or AUTO PRESET)
(Only when the TUNER input is selected)
AUX INPUT
(Only when the AUX input is selected)
BALANCE
BACK LIGHT
A.P.S. SET
TIMER SET
Turning the knob switches the display contents.
1 O.T.T. SET
2
PROG. 1 SET
3
PROG. 2 SET
÷ The selected timer number lights.
÷ If the selected timer number has a previously set pro-
gram with it, the program will be overwritten by the
newly set program.
÷ The previously set contents are displayed. (If you do not
want to change them, simply press the set/demo key.)
Timer operation
To listen to tape
For recording
•
º
?
?
?
?
?
?
?
?
?
?
Continued on next page
61