Making A Connection To A Wap Service - Nokia 6100 User Manual

Making a connection to a WAP service

Firstly, make sure that the service settings of the WAP service you want to use are activated. To
activate the settings:
• Press Menu, and select
want to activate and press Activate.
Secondly, make a connection to the WAP service. There are three ways to connect:
• Open the homepage of the WAP service:
Press Menu, and select
Tip: To quickly open the homepage, press and hold
OR
• Select a bookmark of the WAP service:
Press Menu, and select Services, Bookmarks, and select a bookmark.
If the bookmark does not work with the current active service settings, activate another set of
service settings and try again.
OR
• Key in the address of the WAP service:
Press Menu, and select
for special characters, and press OK.
Note that it is not necessary to add the prefix http:// in front of the address since it will be added
automatically.
Services and Settings. Select
Services and Home.
Services and then Go to
Copyright © 2002 Nokia. All rights reserved.
Active service settings
in standby mode.
address. Key in the address of the WAP service, press
and scroll to the set you
109