Making A Connection To A Wap Service - Nokia 6310i User Manual

password keyed in the following
settings. If you select Manual, the
login information is required when
establishing a connection.
• User name - Key in the user name and
press OK.
• Password - Key in the password and
press OK.
When GPRS is the selected data bearer:
• GPRS connection - Select
online or When needed.
If you select Always
is automatically registered to a GPRS
network when you switch on the
phone. Starting a WAP or PC dial-up
application creates the connection
between phone and network and data
transfer is possible. When you end the
application, GPRS connection is ended
but the registration to the GPRS
network remains.
If you select When
connection is established when you
connect to a WAP service and closed
when you end the WAP connection.
• GPRS access point
point name and press OK.
An access point name is needed to
establish a connection to a GPRS
network. You obtain the access point
name from your network operator or
service provider.
• IP address - Key in the address and
press OK. You obtain the IP address
from your network operator or service
provider.
• Authentication type
Normal.
• Login type - Select
Automatic. If you select
the GPRS connection
Always
online, the phone
needed, the GPRS
- Key in the access
- Select Secure or
Manual or
Manual when
is set to Always
Copyright © 2004 Nokia. All rights reserved
online, the Always online
will be disabled.
• User name - Key in the user name and
press OK.
• Password - Key in the password and
press OK.
Making a connection to a WAP
service
First, make sure that the service settings of
the WAP service you want to use are
activated. To activate the settings:
• Press Menu, select
Select Active service settings
the set you want to activate and press
Activate.
Secondly, make a connection to the WAP
service. There are three ways to connect:
• Open the homepage of the WAP service:
Press Menu, select
Tip: To quickly open the homepage
of a WAP service:
In standby mode, press and hold
.
OR
• Select a bookmark of the WAP service:
Press Menu, select Services, Bookmarks,
and select a bookmark.
If the bookmark does not work with the
current active service settings, activate
another set of service settings and try
again.
OR
• Key in the address of the WAP service:
Press Menu, select
to address. Key in the address of the WAP
service, press
and press OK.
M e n u f u n c t i o n s
connection
Services and Settings.
and scroll to
Services and Home.
Services and then Go
for special characters,
47