Tone Settings - Nokia 6100 User Manual

Tone settings

Press Menu, and select
menu, see Profiles (Menu 3) on page 72. Note that the settings you make, change the settings in the
active profile.
Select Incoming call alert
are Ringing, Ascending,
Select Ringing tone for incoming voice calls. To select ringing tones saved in the Gallery, select
gallery from the ringing tone list.
Select Ringing volume
vibrating alert does not work when the phone is connected to a charger, desktop stand, or a car kit.
Tip: If you receive a ringing tone via OTA or by downloading, you can save the ringing tone in
the Gallery.
Select Message alert tone
tones to set the phone to sound tones for example, when the battery is running out of power.
Select Alert for to set the phone to ring only upon calls from phone numbers that belong to a selected
caller group. Scroll to the caller group you want or
Settings and then Tone
to select how the phone notifies you of an incoming voice call. The options
Ring once, Beep once
and Vibrating alert for incoming voice calls and incoming messages. The
to set the alert tone for the incoming messages,
settings. You can find the same settings in the
and Off.
All calls and press Mark.
Copyright © 2002 Nokia. All rights reserved.
Profiles
Open
Keypad tones, or Warning
80