Basic Functions; Initialization (Master Password, Password And Card) - Samsung Ezon SHS-3120 User Manual

Basic Functions

This section describes the ways to initialize the information registered in the door
lock, to register the password and card data, and to open or close the door.
Initialization
(Master Password, Password and Card)
All registered data (master password, password and card) are deleted. After
initialization, the master password is set to '1234', and the registered password and
card data are all deleted.
After initializing the registered data, reregister the card and password.
Initialization is available while the door is open.
1. Opening the Cover (from inside)
2. Pressing the [Set] Button (from inside)
3. Entering the Master Password (from outside)
Open the battery cover on the indoor unit.
Press and hold the [Set] button for 10
seconds or longer.
- Successful: "Toot-->Toot, toot-->Toot, toot, toot,
toot' sounds are generated.
Enter the master password (press 1234 when
initialized), and then press the [ ] button.
- Successful: "Too~~~t" sound is generated.
- Failed: "Toot~" sound is generated.
13