Setting The Date; Register Mode Operations; Register Mode Operation Examples - Samsung ER-150 Operation Manual

SETTING THE DATE

SET MODE SWITCH TO THE "X" POSITION.
•
The date must be programmed daily and will be printed
on all transaction receipts and on the totalizer printouts.
To program the date, press the appropriate number
keys, then press the "CH" key. Any single digit must be
preceded by a zero.
M
Ex) TO DATE TO BE PROGRAMMED IS OCTOBER 9,1997
1 0
9
9 7

REGISTER MODE OPERATION EXAMPLES

MODE SWITCH SET TO "R" POSITION
•
This section provides examples of practice in the
register mode. When an error occurs, the symbol "E"
will appear on the display accompanied by an error
tone. Clear this error condition by pressing the "C" key.
The Error prompt may indicate an incorrect key has
been entered, or a compulsory function has been
performed.
M D
0 9 9
1 0 9
1 0 0
D Y
7 CH
7 CH
9 CH
11
Y CH
10-09-97
09-10-97
97-10-09