Connection Using Pppoe - Sony PCS-1 System Integration Manual

3-7. Connection using PPPoE

Example of system
Teleconference
terminal A
Ethernet
210.10.10.10
When a call is initiated from teleconference terminal A to teleconference terminal B.
1. The LAN setup menu of teleconference terminal B is set as described below.
DHCP Mode:
Host Name:
IP Address:
Network Mask:
Gateway Address:
DNS Address:
Gatekeeper Mode:
Gatekeeper Address:
User Alias:
User Number:
SNMP Mode:
Trap Destination:
Community:
Description:
Location:
Contact:
NAT Mode:
NAT Address:
Packet Resend Request: ON
Adaptive Rate Control: ON
LAN Mode:
Port Number Used:
TCP Port Number:
UDP Port Number:
TOS:
PPPoE:
PPPoE User Name:
PPPoE Password:
Fixed IP for PPPoE:
Fixed IP Address for PPPoE: 211.10.10.10
PPPoE DNS:
PCS-1/1P
Internet
ONU
Regional IP
FTTH
network
OFF
Blank
Blank
Blank
Blank
Blank
OFF
Blank
Blank
Blank
OFF
Blank
public
Videoconference Device
Blank
Blank
OFF
Blank
Auto Nagotiation (This mode is changed to a proper mode when mismatching
occurs in the mode. Refer to "4-2. PCS-1/1P and Hub setting".)
Default
2253
49152
OFF
ON
User (account) name acquired from a provider
Password acquired from a provider
On (When fixed IP is acquired)
Obtain automatically (Acquired from a provider. Select "Set" when the
fixed DNS server address is specified. Enter the addresses specified from a
provider in "Primary DNS" and "Secondary DNS", respectively.)
Teleconference
ONU
terminal A
FTTH Ethernet
211.10.10.10
3-13