Connection Via Dhcp And Gatekeeper - Sony PCS-1 System Integration Manual

3-5. Connection via DHCP and Gatekeeper

Example of system
LAN1
Teleconference terminal A
User name: PCS1A
User number: 100
When a call is initiated from teleconference terminal A to teleconference terminal B.
1. The LAN setup menu of teleconference terminal B is set as described below.
DHCP Mode:
Host Name:
IP Address:
Network Mask:
Gateway Address:
DNS Address:
Gatekeeper Mode:
Gatekeeper Address:
User Alias:
User Number:
SNMP Mode:
Trap Destination:
Community:
Description:
Location:
Contact:
NAT Mode:
NAT Address:
Packet Resend Request: Blank
Adaptive Rate Control: OFF (Set to ON when a packet loss occurs frequently.)
LAN Mode:
Port Number Used:
TCP Port Number:
UDP Port Number:
TOS:
PPPoE:
PPPoE User Name:
PPPoE Password:
Fixed IP for PPPoE:
Fixed IP Address for PPPoE: Blank
PPPoE DNS:
Primary DNS:
Secondary DNS:
PCS-1/1P
Gatekeeper
DHCP
192.100.10.20
server A
ON
Enter any name.
Blank (Cannot be set.)
Blank (Cannot be set.)
Blank (Cannot be set.)
Blank (Cannot be set.)
ON
192.100.10.20
Enter any name. (Example: PCS1B)
Enter any number. (Example: 200)
OFF
Blank
public
Videoconference Device
Blank
Blank
OFF
Blank
Auto Nagotiation (This mode is changed to a proper mode when mismatching
occurs in the mode. Refer to "4-2. PCS-1/1P and Hub setting".)
Default (Set to "Custom" when a port number is specified by the network
administrator.)
2253 (Enter the port number specified by the network administrator when
the port number used is set to "Custom".)
49152 (Enter the port number specified by the network administrator when
the port number used is set to "Custom".)
OFF
OFF
Blank
Blank
OFF
Obtain automatically
Cannot be set.
Cannot be set.
Router Router
DHCP
server B
LAN2
Teleconference terminal B
User name: PCS1B
User number: 200
3-9