Advertisement
TO SLICE OR SHRED cont.
6 Turn control knob switch to ON, then press down lighl_y bul firmly on food pusher and
movabia loop to lead items down and onto slice/shred d{sc. When the chute is empty.
turn control knob switch to OFF, unplug, allow the disc to stop rotating, and unlatch the
food chule lld
7 To process more food, place food into the foodchute and repeat above steps When
finished, press OFF, unplug, and allow disc to stop rotating
_
CAUTION:
Before opening the Bowl Cover Assembly,
be sure
you
have turned the unit OFF and unplugged the cord,
8 Open bowl cover by turning clockwise, and remove disc with disc siam..
_
ARNING:
Slicing/Shredding
Disc is very sharp_ Use caution when
handling,
9. Unlock Bowl by turning clockwise towards Unlock icon and lifl bow! of[
Emply the processed food
TO PROCESS LONG AND THIN FOOD ITEMS
_
CAUTION:
Make sure control knob switch is turned to OFF and unit is
unplugged beforeuse. Neveruse your hand to push foDd into processor°
The use of heavy pressure will not speed operation°
t Lock the Bowlonto the Baseas described in Assembly
2 Slide lhe disc stem down onto the center post of the base, then place the slice/shred
disc. with the desired side facing up for either slicing or shredding, onto lhe disc stem
and push down At this point the disc will be at the top of the bowl
_
WARNING:
WARNING: Slicing/Shredding
Disc ts
sharp,
very
Use caution when handling.
3. Lock bowt cover assembly onto bowl
4. Make sure the food chute lid is latched into place
Advertisement
