Clearing Last Called Numbers; Changing The Lock Code; Datamode - Nokia 121 Owner's Manual

If you have any number of accessories connected to the
phone, the name of the first accessory is shown. If you
have several accessories, scroll the accessory list by
using v or V until you find the accessory whose setting
you wish to change.
· Press STO to enter the respective accessory menu
and scroll the setting options by using v or V
» Store the new setting in memory by pressing STO.
For messages generated by accessories, refer to the
user's guides delivered with them.
CLEAR LAST CALLED NUMBERS
If this feature is active, the last called number stack will
automatically be erased when the phone is powered off.
To set the phone to clear the last called numbers
automatically from memory:
³ Press MENU 10.
· Use v or V to select CLEAR LAST ON or CLEAR LAST
OFF.
» Press STO to confirm the setting.

CHANGING THE LOCK CODE

To change the lock code of your phone.
³ Press MENU 11.
The phone asks you to key in the 5-digit security code of
your phone (SECURITY?).
· Key in the security code and press STO. Factory
default is 12345. If you have keyed in an incorrect code,
the CODE ERROR message will appear. After you have
entered the right security code, the phone asks you to key
in the new lock code (NEW LOCK CODE?)
» Key in the new 4-digit lock code and press STO. The
code may contain numerical digits only; other characters
(e.g. *, #) are not allowed. The message STORED appear
to confirm that the new lock code has been set.

DATAMODE

Not only can your phone make and receive voice calls but
it can, when connected to the car kit, send and receive
data, too.
.
23