NorthStar Horizon User Manual page 9

----------------¥
The computer, terminal, printer, and any other peripheral devices you use MUST be
plugged into the same circuit or circuit breaker.
Other electrical equipment(such as copying machines, fluorescent lights or typewriters)
should NOT be plugged into the same circuit. The electrical noIse generated by such
equipment can interfere with the proper operation of the computer system.
While a power strip is often convenient when several pieces of equipment are operati ng as a
system, take care not to overload the circuit. Do not use extension cords to power the
system.
Turn on the power to the computer. The
HORIZON onloff switch is located next to
the fan on the back panel. To turn the
power on, press the outer edge of the
switch in toward the computer (Fig. 2-12).
Turning on the HORIZON
Figure 2-12
When you turn the power on, the fan begins to whir and the red indicator light over the
NorthStar logo on the front panel is illuminated.
9