NorthStar Horizon User Manual page 5

ew,
Jfl
2.4.1 Serial Printer
A serial printer can be connected to the HORIZON by either a flat ribbon cable or a round
cord. The printer cord or cable must end in the same kind of "D" connector shown in Figure
2-2, above.
Take the free end of the printer cable and
press the "D" shaped connector carefully
over the left serial port of the HORIZON
back panel shown in Figure 2-4. These
connectors only match one
way,
so make
sure they ilre properly aligned.
Connecting a Serial Printer
to the HORIZON
Figure 2-4
The HORIZON, terminal, and printer will now be connected as shown in Figure 2-5.
Computer
System
with Serial. Printer
~ ' = 0 ' = '
o
0
.=.
Q.t::;;:r.
.'CP'
0
.~.
I
.'C:'.
0
.c::1.
o e0(:3
:~c:Jo
Figure 2-5
5