Toshiba E-studio 520 Scanning Manual page 40

3. Scan to File
15.
NOTE: When 20 Save as file jobs are reserved, the reservation fulll message will be displayed
in the touch panel. In that case, wait until the next Save as file job is completed or
delete the jobs from the [JOB STATUS] button.
40
If the "To continue, place document on glass. And press
Scan!" message is displayed, place another original on glass
and press [SCAN!] to scan another original, or press the
[JOB FINISH] button to finish scanning.
• When the original is set on the Automatic Document Feeder, this screen is
not displayed. However, this screen is displayed when you press the [CON-
TINUE] button during scanning the originals.
• If you want to cancel the storage of the scanned data, press the [JOB CAN-
CEL] button.
• You can change the setting of the original type and scanning conditions,
using the [EDIT] button before pressing the [SCAN!] button.
Scanning Guide — How to Perform Scan to File