Fax Mode; Tam (Telephone Answering Machine) Interface Mode - Toshiba e-STUDIO50F Operator's Manual

Fax Mode

When your machine is set to this mode, it will immediately begin to receive documents automatically when a
call is received.
Setting the Fax Mode
1
Change Fax Parameter No. 16 (OUT MODE) to 1: Fax.
(See page 35)
2
Operation of Fax Mode
Your machine will begin receiving automatically when a fax call is received.

TAM (Telephone Answering Machine) Interface Mode

Your machine is equipped with a unique feature called TAM Interface which enables it to automatically
switch a single telephone line either to Fax or TAM. You can connect most TAMs in the market to your
machine and use your existing telephone line very efficiently. However, some TAMs may not be compatible
with this machine. Answering Services (Voice Mail) provided by your Local Phone company are not
compatible with this feature. For the operation of your TAM, please refer to the Operator's Manual of the
TAM.
Installing your TAM
1
Make sure that the lamp goes on.
Receiving Documents
RCV MODE=FAX
1. Remove the telephone line cable of your
TAM from the wall jack.
2. Plug the telephone line cable of your
TAM into the TEL jack on the rear of the
fax machine as shown.
61