Telephone Mode - Toshiba e-STUDIO50F Operator's Manual

Telephone Mode

When your machine is set to this mode, your machine will not receive documents automatically. If you
receive a fax call, follow the procedure below to receive documents manually.
Setting the Telephone Mode
1
Change Fax Parameter No. 15 (IN MODE) to 1: Tel.
(See page 35)
2
Operation of Telephone Mode
1
When your telephone rings, lift the handset of the External
Telephone.
If you hear a beep from the phone, it means someone
wants to send a fax. Or, if the caller answers and says he/
she wants to send a fax, then...
2
Remove any document from the ADF.
3a
If you answered the call using the External Telephone,
3b
If you answered the call on an Extension phone,
or
Your machine will be activated remotely.
4
Hang up the phone.
1. This procedure is called "REMOTE RCV" and will only work on a touch tone phone. If your
NOTE
extension phone is not a touch tone phone, press
machine.
Make sure that the lamp goes off.
within 1 second on your Extension phone. (See Note 1)
Receiving Documents
RCV MODE=TEL
on the control panel of your fax
START
59