Changing Properties - HP 800 User Manual

TIP:
NOTE:
No arguments – The system is reset to the same type (either a single-server
installation with the MS and ES on the same server, an MS, or an ES), the
database is cleared, and the property files are restored to their defaults
ms – The system is reset to be an MS, the database is cleared, and the
property files are restored to their defaults
es – The system is reset to be an ES, the database is cleared, and the
property files are restored to their defaults.
See the installation guide for instructions on resetting the system using the
LCD panel.
The resetSystem.py file is in the following directory:
cd /usr/local/nac/bin

Changing Properties

To change the property values in the properties files:
Command line window
1. Log in as root to the NAC 800 MS using SSH.
2. Enter the following at the command line:
setProperty.py <DESTINATION> <TYPE> <VALUES>
Where:
• <DESTINATION> is one or more of:
-c <cluster name> Set properties on all Enforcement Servers in
cluster
-e <ES hostname> Set properties on Enforcement Server
Set properties on all Enforcement Servers
-a
Set properties on Management Server
-m
• <TYPE> is
blank, nothing specified
-l
Properties are log4j properties
System Administration
System Settings
13-7